AFM Engineering, Inc.
Flag AFM Engineering, Inc. Contact US   Flag
AFM Engineering HOT STAMPING PAD PRINTING ULTRASONIC WELDING
Applications Lab Automation Consulting Machine Accessories New Machinery Production Services
Machinery Rebuilding Replacement Parts Service Tooling Used Machinery Vendor Information
Skip Navigation Links.
We accept
Master Card   Visa Card
We ship
FedEx  UPS
We proudly use the following Software:
AutoCadd 
AutoCAD Electrical
Solidworks 
Cimatron  
AFM Engineering> Hot Stamp Machine Control Box Information> Kensol Franklin OEM> Kensol-Franklin GE Box> Kensol-Franklin GE Box Back
Hot Stamping Machine Control
Main Screen
Time settings:
1.PRINT TIME. Sets the time the head is down on the part being printed.
2.FOIL BACKUP DELAY TIME.
3.FOIL BACKUP TIME.
4.HEAD UP DELAY TIME. Sets the time from when the head starts up until it stops going up.
5.HEAD UP STOP TIME. Sets the time the head stops before moving up to the up position.
6.FOIL PULL DELAY TIME. Sets the time from when the head starts up until the foil starts to pull.
7.FOIL PULL TIME. Sets the time the foil is being pulled.
Buttons:
1.FOIL FEED. Pulls the foil for as long as it is touched.
2.PULL SELECT. Selects the foil pull function, BEFORE, AFTER, or OFF
3.DEBUG SCREEN. Change to the DEBUG screen.
4.MAIN SCREEN. Change to the MAIN screen.
4.CNT RESET. Resets the machine cycle counter.
Indicators:
1.TEMP ALARM. Indicates if the temperature is within the alarm range. If RED, the machine will not run.
2.COUNTER. Indicates the number of machine cycles since the last counter reset.
Control Boc PLC no Disconnect
SERVING THE PLASTICS INDUSTRY SINCE 1979 WITH SYSTEMS
AND SERVICES FOR SECONDARY FINISHING OPERATIONS