| Hot Stamping Machine Robot Integration |
| <<Previous Page 2 of 12 Next>> |
| Robot Interface |
| The Robot Interface varies with the type of Robot
being used. Most Robots Require the following: |
| 1. |
Signal from Robot to Cycle Hot Stamp Machine. Normally a 24vdc signal.
This signal must be maintained until a Print head down signal is sent
from the Hot Stamp Machine. |
| 2. |
Print Head Down signal.
A dry contact form the Hot Stamp Machine when the Print Head reached the
Head down position. |
| 3. |
Ready Signal to load. A dry contact for the Hot Stamp Machine when it is
ready to load. |
| 4. |
Ready Signal to unload. A dry contact for the Hot Stamp Machine when it
is ready to unload. |
| 5. |
Part in Place Signal. A dry contact form the Hot Stamp Machine when then
there is a part in place. |
|
 |
|